 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) TS391 LOW POWER SINGLE VOLTAGE COMPARATORS .WI .VERY .LOWI .LOWI .LOWI .I .LOW .DI .TTL, DE SINGLE SUPPLY VOLTAGE RANGE OR DUAL SUPPLIES +2V TO +36V OR 1V TO 18V LOW SUPPLY CURRENT (0.2mA) INDEPENDENT OF SUPPLY VOLTAGE (1 mW/comparator at +5V) NPUT BIAS CURRENT : 25nA TYP NPUT OFFSET CURRENT : 5nA TYP NPUT OFFSET VOLTAGE : 1mV TYP NPUT COMMON-MODE VOLTAGE RANGE INCLUDES GROUND OUTPUT SATURATION VOLTAGE : 250mV TYP. (IO = 4mA) FFERENTIAL INPUT VOLTAGE RANGE EQUAL TO THE SUPPLY VOLTAGE DTL, ECL, MOS, CMOS COMPATIBLE OUTPUTS L SOT23-5L (Tiny Package) DESCRIPTION These devices consist of a low power voltage comparator designed specifically to operate from a single supply over a wide range of voltages. Operation from split power supplies is also possible. This comparator also has a unique characteristic in that the input common-mode voltage range includes ground eventhough operatedfrom a single power supply voltage. PIN CONNECTIONS (top view) ORDER CODES Part Number TS391IL Example : TS391IL Temperature Range -40, +125 C o Package L * Output 1 5 + VCC V CC -2 Inve rting input 3 4 Non-inve rting input November 1998 1/5 TS391 SCHEMATIC DIAGRAM VCC 3.5A 100A 3.5A 100A Non-inverting Input VCC Inverting Input VCC VO VCC ABSOLUTE MAXIMUM RATINGS Symbol VCC Vid Vi Ptot Toper Tstg Supply Voltage Differential Input Voltage Input Voltage Output Short-circuit to Ground - note 1 Power Dissipation - note 2 Operating Free-air TemperatureRange Storage Temperature Range + Parameter TS391I 18 or 36 36 -0.3 to +36 Infinite 500 -40 to +125 -65 to +150 Unit V V V mW o o C C Notes : 1. Short -circui t from the output to VCC can cause excessi ve heating and eventual destruct ion. T he maximum output current i s approxi mat ely 20mA, independent of the magni tude of VCC +. 2. T j = 150 o C, Ta mb = 25 o C with Rt hja = 250 o C/W for S OT 23-5 package. 2/5 TS391 ELECTRICAL CHARACTERISTICS VCC+ = +5V, VCC- = 0V, Tamb = 25oC (unless otherwise specified) Symbol Vio Parameter Input Offset Voltage - (note 2) o Tamb = +25 C Tmin. Tamb Tmax. Input Bias Current - (note 3) o Tamb = +25 C Tmin. Tamb Tmax. Input Offset Current o Tamb = +25 C Tmin. Tamb Tmax. Large Signal Voltage Gain VCC = 15V, RL = 15k, Vo = 1 to 11V Supply Current VCC = 5V, no load VCC = 30V, no load Input Common Mode Voltage Range - (note 4) Tamb = +25oC Tmin. Tamb Tmax. Differential Input Voltage - (note 6) Output Sink Current (Vid = -1V, VO = 1.5V) Low Level Output Voltage (Vid = -1V, Isink = 4mA) o Tamb = 25 C Tmin. Tamb Tmax High Level Output Current (Vid = 1V, VCC = VO = 30V) o Tamb = 25 C Tmin. Tamb Tmax Response Time (R L = 5.1k to VCC+) - (note 5) Large Signal Response Time + (Vi = TTL, Vref = +1.4 V, RL = 5.1k to VCC ) 6 16 mV 250 400 700 0 0 50 Min. Typ. 1 Max. 5 9 nA 25 250 400 nA 5 50 150 V/mV 200 mA 0.2 0.5 0.5 1.25 VCC+ -1.5 + VCC -2 VCC + Unit mV Iib Iio Avd ICC Vicm V Vid Isink VOL V mA IOH 0.1 1 1.3 300 nA A s ns tre trel No tes : 2. At output sw it ch point, VO 1.4V, RS = 0 with VCC + f rom 5V to 30V and over the full input common-mode range (0V to VCC+ 1.5V). 3. T he direction of the input cur rent is out of the IC due t o the PNP input stage. This cur rent is essenti ally constant, i ndependent of the state of the output, so no loading charge exists on the reference or input l ines. 4. T he input common-mode voltage of either i nput signal volt age should not be allow ed to go negati ve by more than 0.3V. T he upper end of the common-mode voltage range i s VCC + -1.5V, but either or bot h inputs can go to +30V without damage. 5. T he response time specifi ed is for a 100mV input step wi th 5mV overdr ive. F or lar ger overdrive signals 300ns can be obtained. 6. Positive excursions of input volt age may exceed the power suppl y level. As long as the other voltage remains wit hin the common-mode range the comparat or wi ll provi de a proper output state. The l ow input vol tage st ate must not be l ess than -0.3V (or 0.3V below the negative power supply, if used). 3/5 TS391 SUPPLY CURRENT versus SUPPLY VOLTAGE 0.5 SUPPLY CURRENT (mA) 0.4 0.3 Ta m b = +70 C INPUT CURRENT versus SUPPLY VOLTAGE 80 Vi = 0V INPUT CURRENT (nA) 60 40 20 Tamb = +125C Tamb = +70C 40 0 10 20 30 SUPPLY VOLTAGE (V) 40 R i = 10 Tamb = 0C Tamb = +25C 9 Ta mb = -55 C Ta mb = 0 C T = +25 C Tamb = -55C 0.2 Tamb = +125 C 0.1 R= 0 10 20 30 S UP P LY VOLTAGE (V) OUTPUT SATURATION VOLTAGE versus OUTPUT CURRENT 10 10 10 10 10 1 RESPONSE TIME FOR VARIOUS INPUT OVERDRIVES - NEGATIVE TRANSITION OUTPUT VOLTAGE(V) SATURATION VOLTAGE(V) Out of saturation 0 Tamb = +125C -1 -2 Tamb = +25C -3 -2 -1 0 1 2 INPUT VOLTAGE(mV) Tamb = -55C 6 5 4 3 2 1 0 0 -50 -100 Input overdrive : 5mV 20mV eI 5V 5.1k eo 100mV Tamb = +25C 0 0.5 1 1.5 TIME (s) 2 10 10 10 10 10 OUTPUT SINK CURRENT (mA) RESPONSE TIME FOR VARIOUS INPUT OVERDRIVES - POSITIVE TRANSITION OUTPUT VOLTAGE (V) 6 Input overdrive : 100mV 5 4 5mV 3 2 20mV 1 0 100 Tamb = +25C 50 0 0 0.5 1 1.5 TIME (s) 5V 5. 1 k e I INPUT VOLTAGE(mV) eo 2 4/5 TS391 PACKAGE MECHANICAL DATA 5 PINS -TINY PACKAGE (SOT23) A E A2 D b A1 E1 C L Dim. A A1 A2 b C D E E1 L Millimeters Min. 0.90 0 0.90 0.35 0.09 2.80 2.60 1.50 0.10 Max. 1.45 0.15 1.30 0.50 0.20 3.00 3.00 1.75 0.60 0.034 0.013 0.003 0.110 0.102 0.059 0.003 Min. 0.034 Inches Max. 0.057 0.006 0.051 0.020 0.008 0.118 0.118 0.069 0.024 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publ ication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life suppo rt devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a trademark of STMicroelectronics ORDER CODE (c) 1998 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. (c) http://www.st.com 5/5 |
Price & Availability of TS391IL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |